Quality by Design Tool Assessed Ultraperformance Liquid Chromatography Method for the Analysis of Remogliflozin and Teneligliptin in Oral Dosage Form.

The UPLC methodology was used to establish a method for determining the qualitative and quantitative content of teneligliptin and remogliflozin tablets in oral solid dose form, as no simultaneous method was available. The developed liquid chromatography method consists of an X-Bridge C18 100 mm × 3.5 mm, 2.1 mm column with an economical 0.2 mL/min flow rate. A wavelength of 248 nm was used for detection, and the temperature of the column compartment was 30 °C. The method was evaluated using a static tool quality by design after it was validated as per the regulations. The data from validation result in linearity for both analytes with a correlation coefficient of more than 0.999. The accuracy data were found from a minimum of 98.1 to a maximum of 100.9. All of the validation results met the acceptance criteria. The stability of the analytical solutions proved for 24 h at bench and refrigerator temperatures. Studies of force degradation proved the stability indicating the nature of the method. A factorial design was used to evaluate the method performance.

Dual active pyrimidine-based carbocyclic nucleoside derivatives: synthesis, and in silico and in vitro anti-diabetic and anti-microbial studies.

Diabetes mellitus (DM) is a chronic metabolic disorder marked by high blood glucose levels, impairing glucose production in the body. Its prevalence has steadily risen over the past decades, leading to compromised immunity and heightened susceptibility to microbial infections. Immune dysfunction associated with diabetes raises vulnerability, while neuropathy dulls sensation in the extremities, reducing injury awareness. Hence, the development of novel chemical compounds for anti-diabetic and anti-infective treatments is imperative to mitigate adverse effects. In this study, we designed and synthesized pyrimidine-based carbocyclic nucleoside derivatives with C-4 substitution to assess their potential in inhibiting α-glucosidase for managing diabetes mellitus (DM) and microbial infections. Compounds 8b and 10a displayed promising IC50 values against α-glucosidase (43.292 nmol and 48.638 nmol, respectively) and noteworthy docking energies (-9.4 kcal mol-1 and -10.3 kcal mol-1, respectively). Additionally, compounds 10a and 10b exhibited better antimicrobial activity against Bacillus cereus, with the zone of inhibition values of 2.2 ± 0.25 mm and 1.4 ± 0.1 mm at a 100 µl concentration, respectively. Compound 10a also exhibited a modest zone of inhibition of 1.2 ± 0.15 mm against Escherichia coli at 100 µl.

Synthesis and Trace-Level Quantification of Mutagenic and Cohort-of-Concern Ciprofloxacin Nitroso Drug Substance-Related Impurities (NDSRIs) and Other Nitroso Impurities Using UPLC-ESI-MS/MS-Method Optimization Using I-Optimal Mixture Design.

Globally, the pharmaceutical industry has been facing challenges from nitroso drug substance-related impurities (NDSRIs). In the current study, we synthesized and developed a rapid new UPLC-MS/MS method for the trace-level quantification of ciprofloxacin NDSRIs and a couple of N-nitroso impurities simultaneously. (Q)-SAR methodology was employed to assess and categorize the genotoxicity of all ciprofloxacin N-nitroso impurities. The projected results were positive, and the cohort of concern (CoC) for all three N-nitroso impurities indicates potential genotoxicity. AQbD-driven I-optimal mixture design was used to optimize the mixture of solvents in the method. The chromatographic resolution was accomplished using an Agilent Poroshell 120 Aq-C18 column (150 mm × 4.6 mm, 2.7 µm) in isocratic elution mode with 0.1% formic acid in a mixture of water, acetonitrile, and methanol in the ratio of 475:500:25 v/v/v at a flow rate of 0.5 mL/min. Quantification was carried out using triple quadrupole mass detection with electrospray ionization (ESI) in a multiple reaction monitoring technique. The finalized method was validated successfully, affording ICH guidelines. All N-nitroso impurities revealed excellent linearity over the concentration range of 0.00125-0.0250 ppm. The Pearson correlation coefficient of each N-nitroso impurity was >0.999. The method accuracy recoveries ranged from 93.98 to 108.08% for the aforementioned N-nitrosamine impurities. Furthermore, the method was effectively applied to quantify N-nitrosamine impurities simultaneously in commercially available formulated samples, with its efficiency recurring at trace levels. Thus, the current method is capable of determining the trace levels of three N-nitroso ciprofloxacin impurities simultaneously from the marketed tablet dosage forms for commercial release and stability testing.

Novel 5-Substituted Oxindole Derivatives as Bruton's Tyrosine Kinase Inhibitors: Design, Synthesis, Docking, Molecular Dynamics Simulation, and Biological Evaluation.

Bruton's tyrosine kinase (BTK) is a non-RTK cytoplasmic kinase predominantly expressed by hemopoietic lineages, particularly B-cells. A new oxindole-based focused library was designed to identify potent compounds targeting the BTK protein as anticancer agents. This study used rational approaches like structure-based pharmacophore modeling, docking, and ADME properties to select compounds. Molecular dynamics simulations carried out at 20 ns supported the stability of compound 9g within the binding pocket. All the compounds were synthesized and subjected to biological screening on two BTK-expressing cancer cell lines, RAMOS and K562; six non-BTK cancer cell lines, A549, HCT116 (parental and p53-/-), U2OS, JURKAT, and CCRF-CEM; and two non-malignant fibroblast lines, BJ and MRC-5. This study resulted in the identification of four new compounds, 9b, 9f, 9g, and 9h, possessing free binding energies of -10.8, -11.1, -11.3, and -10.8 kcal/mol, respectively, and displaying selective cytotoxicity against BTK-high RAMOS cells. Further analysis demonstrated the antiproliferative activity of 9h in RAMOS cells through selective inhibition of pBTK (Tyr223) without affecting Lyn and Syk, upstream proteins in the BCR signaling pathway. In conclusion, we identified a promising oxindole derivative (9h) that shows specificity in modulating BTK signaling pathways.

Quantification of Drospirenone- and Ethinyl Estradiol-Related Impurities in a Combined Pharmaceutical Dosage Form by a Chromatography Method With a QbD Robustness Study.

BACKGROUND: The estimation of drugs containing drospirenone (DRSP) and ethinyl estradiol (EE), and their related impurities, in low-dose oral contraceptive drug products is an extremely challenging target. The proposed research sought to develop and validate a stability-indicating method for quantifying drug substances and their related impurities in tablet formulation. OBJECTIVE: To develop and validate a simple, specific, accurate, precise, and stability-indicating reverse-phase (RP)-HPLC method for quantification of DRSP, EE, and their impurities in accordance with International Conference on Harmonisation (ICH) guidelines. METHOD: The separation was achieved using an Agilent Zorbax SB C18 column (4.6 mm × 250 mm, 5 µm) with a detection wavelength of 215 nm and mobile phases A (100% acetonitrile) and B (acetonitrile-water, 1 + 3, v/v) at a flow rate of 1.3 mL/min and a column temperature of 40°C. RESULTS: The recovery study of each impurity was conducted in the range of 24 to 72 µg/mL for DRSP-related impurities and 0.2 to 0.6 µg/mL for EE-related impurities with respect to the specification limit. A linearity study was conducted over a range of 1.5 to 90 µg/mL for DRSP and DRSP-related impurities, and 0.125 to 0.75 µg/mL for EE-related impurities. A Quality by Design (QbD) study demonstrated the method's robustness. CONCLUSIONS: As per current guidelines, a stability-indicating method has been developed for the determination of impurities in DRSP/EE film-coated tablets. A QbD-based robustness test was performed and the method was found to be robust. HIGHLIGHTS: An accurate, precise, stability-indicating, gradient RP-HPLC method has been developed and validated to determine DRSP, EE, and nine related impurities in tablet formulation. A QbD technique was used to establish a robustness study.

A quality-by-design evaluated liquid chromatography method development and validation for the separation and quantification of nitroxoline and its impurities.

A novel, isocratic, sensitive, stability-indicating high-performance liquid chromatography method was developed for the separation and quantification of related substances in nitroxoline (NTL). The chromatographic separation has been achieved on Inertsil ODS-3 V, (250 × 4.6 mm, 5 µm) at 240 nm using ethylenediamine tetraacetic acid buffer and methanol in the ratio of 60:40 v/v as mobile phase. The performance of the method has been checked as per the International Conference on Harmonization guidelines for specificity, linearity, accuracy, precision, and robustness. Regression analysis showed a correlation coefficient value greater than 0.99 for NTL and its three impurities. The detection limit of impurities was in the range of 0.01% (0.05 µg/mL)-0.22% (1.1 µg/mL) indicating the sensitivity of the newly developed method. The accuracy of the method was established based on the recovery obtained between 94.7% and 104.1% for all the impurities. The percentage relative standard deviation obtained for the repeatability was less than 4.0% at the specification level for all impurities. Forced degradation was performed to establish the stability-indicating nature of the method and to know about the degradation products, the quality of a drug substance changes with time under the influence of stress conditions. Thus, the proposed method was validated and found to be specific, sensitive, linear, accurate, precise, reproducible, and beneficial for routine usage.

New oxindole carboxamides as inhibitors of DENV NS5 RdRp: Design, synthesis, docking and Biochemical characterization.

Dengue is a mosquito-borne disease caused by the dengue virus belonging to family flaviviridae and has grown to be a major global public health issue. Despite decades of effort, the global comeback of dengue is evidence of the inadequacy of present management techniques. Due to the loss of healthy lives and the depletion of scarce medical resources, dengue has a significant negative economic impact in underdeveloped countries. In recent years, research for tackling the incidences of dengue infection has increased. The structure of the viral genome has been deciphered with the non-structural protein, known as NS5 serving as a potential target. NS5 consisting of an MTase domain involved in RNA capping and an RdRp domain involved in viral replication. In the presented work, a series of new Oxindoline Carboxamide derivatives were designed and synthesized for inhibiting the viral RNA dependent RNA-polymerase (RdRp) activity of DENV. The novel compounds were put through tests including molecular docking and surface plasmon resonance (SPR) binding analysis to evaluate their affinity for the viral protein and their potential as novel inhibitors of the virus. From a total of 12 derivative compounds, four compounds OCA-10c, OCA-10f, OCA-10j & OCA-10i, were found to exhibit high affinity for NS5 RdRp, the KD values being 1.376 µM, 1.63 µM, 7.08 µM & 9.32 µM respectively. Overall, we report novel inhibitors of DENV RdRp activity with potential to be utilized against DENV for treating humans after further optimization.

Internal stimuli-responsive nanocarriers for controlled anti-cancer drug release: a review.

Cancer disease is one of the most frequent life-threatening, with a high fatality rate worldwide. However, recent immunotherapy studies in various tumours have yielded unsatisfactory outcomes, with just a few individuals experiencing long-term responses. To overcome these issues, nowadays internal stimuli-responsive nanocarriers have been widely exploited to transport a wide range of active substances, including peptides, genes and medicines. These nanosystems could be chemically adjusted to produce target-based drug release at the target location, minimizing pathological and physiological difficulties while increasing therapeutic efficiency. This review highlights the various types of internal stimuli-responsive nanocarriers and applications in cancer diagnosis. This study can provide inspiration and impetus for exploiting more promising internal stimuli-responsive nanosystems for drug delivery.

A new synthetic approach to cyclic ureas through carbonylation using di-tert-butyl dicarbonate (boc anhydride) via one pot strategy.

A new approach has been successfully employed to synthesize cyclic ureas via carbonylation, utilizing Boc anhydride and employing K2CO3 as a base along with N,N-dimethylformamide as the solvent. Remarkably high yields were achieved using K2CO3 in conjunction with (Boc)2O, enabling the streamlined preparation of benzimidazolones and 2-benzoxazolones within a single reaction vessel. Significantly, this approach obviates the necessity for using any dangerous reagents, rendering it environmentally friendly, and its key benefit lies in being a metal-free system. The method stands out for its efficiency, concise pathway, optimization from readily accessible starting materials, and ease of execution. The resulting benzimidazolones and 2-benzoxazolones were thoroughly characterized using techniques including LCMS, 1H NMR, and 13C NMR.

Investigating Betrixaban Maleate drug degradation profiles, isolation and characterization of unknown degradation products by mass-triggered preparative HPLC, HRMS, and NMR.

Betrixaban Maleate, a novel oral, once-daily factor Xa inhibitor drug substance, was subjected to stress testing under a wide range of degradation conditions, including acidic hydrolysis, alkaline hydrolysis, oxidative, thermal, and photolytic, to determine its inherent stability. The drug was biodegradable in acidic and alkaline environments, and three new degradation products were identified. Two degraded products are formed in an acidic environment, while the third is in alkaline conditions. The three degradants were identified using UPLC-ESI/MS and isolated using mass-triggered preparative HPLC, and their structures were unambiguously elucidated using HRMS and 2D NMR techniques. Based on spectral and chromatographic data, it was firmly proven that these distinct degradation products were the betrixaban chemical's hydrolysis components. The formation of the degradants has been hypothesized through several possible mechanisms.

Quality by design tool-evaluated stability-indicating ultra-performance liquid chromatography method for the determination of drugs (ritonavir and darunavir) used to treat the human immunodeficiency virus/acquired immunodeficiency syndrome.

Ritonavir and darunavir were examined using a ultra-performance liquid chromatography (UPLC) approach in pharmaceutical dosage forms. The small number of analytical studies that are currently available do not demonstrate the method's stability or nature. The study sought to assess both chemicals using a stability-indicating approach with a relatively short run time. The HSS C18 (100 × 2.1 mm), 2-mm column was used for the chromatographic separation, and isocratic elution was used to achieve this. In the mobile phase, methanol and 0.01 M phosphate buffer (pH 4.0) were included in a 60:40 (v/v) ratio. Throughout the analysis, the flow rate was kept at 0.2 mL min-1 , and a photodiode array detector set to 266 nm was used to find the major components. The proposed method showed a linear response (r2  > 0.999), and the accuracy was between 98.0% and 102.0%. The precision data showed relative standard deviation ≤1.0%. The UPLC method for quantification of ritonavir and darunavir in pharmaceutical dosage forms using a very short run time of under a minute is the subject of the proposed article. To meet current regulatory criteria, the quality by design idea was used in the method performance verification.

Antiproliferative Activity of New Pyrazole-4-sulfonamide Derivatives: Synthesis and Biological Evaluation.

Pyrazole and sulfonamide constitute an important class of drugs, with several types of pharmacological agents. Facile synthesis of two new series of 3,5-dimethyl-1H-pyrazole-4-sulfonamide and 1,3,5-trimethyl-1H-pyrazole-4-sulfonamide derivatives was designed and synthesized. These pyrazole-4-sulfonamide derivatives are characterized by Fourier transform infrared (FT-IR), 1H NMR, 13C NMR, and elemental analysis, and their biological evolution data are presented. This paved way for the development of new pyrazole-4-sulfonamide derivatives. These compounds are tested for their in vitro antiproliferative activity against U937 cells by the CellTiter-Glo Luminescent cell viability assay using Mitomycin C. Cytotoxicity detection is based on the measurement of LDH activity, while these compounds did not exhibit cytotoxic activity on these cells. Half maximal inhibitory concentration (IC50) was calculated by Graph Pad Prism software for each dose. Their structure-activity relationships were obtained and discussed.

Identification, isolation, and structural characterization of novel forced degradation products of Ertugliflozin using advanced analytical techniques.

The research elucidates the stress degradation behavior of Ertugliflozin, which is used for the treatment of type-2 diabetics. The degradation was conducted as per ICH guidelines and Ertugliflozin is relatively stable in thermal, photolytic, neutral, and alkaline hydrolysis conditions; however, considerable degradation was detected in acid hydrolysis and oxidative hydrolysis. Degradation products were identified by ultra-high-performance liquid chromatography-mass spectrometry, isolated by semi-preparative high-performance liquid chromatography, and structural characterization using high-resolution mass spectrometry and nuclear magnetic resonance spectroscopy. Total four degradation products were identified and isolated in acid degradation, which are degradation products 1, 2, 3, and 4. Whereas in oxidative conditions, degradation product 5 was identified. All the five degradation products formed are novel, which was not reported earlier. This is the first time documented complete structural characterization of all five degradation products by using a hyphenated analytical technique. High-resolution mass, and nuclear magnetic resonance spectroscopy were used in the present study to get concrete confirmation of degradation products structures. The current method is also used to identify degradation products with shorter runtime in the future.

Regulatory Perspective Reverse Engineering Analysis of the Mast Cell Stabilizer and the Histamine Receptor Antagonist (Olopatadine HCl): Instrumental and Classical Methods for Multiple Formulations.

This study evaluates the unknown qualitative (Q1) and quantitative (Q2) formulas for nasal spray and ophthalmic solution formulations of olopatadine HCl by classical and instrumental techniques to match the generic formula with reference-listed drugs to avoid clinical study. Reverse engineering of olopatadine HCl nasal spray 0.6% and ophthalmic solution 0.1, 0.2% formulations was accurately quantified using a simple and sensitive reversed-phase high-performance liquid chromatography (HPLC) method. Both formulations possess similar components, namely ethylenediaminetetraacetic acid (EDTA), benzalkonium chloride (BKC), sodium chloride (NaCl), and dibasic sodium phosphate (DSP). These components were qualitatively and quantitatively determined using the HPLC, osmometry, and titration techniques. With derivatization techniques, EDTA, BKC, and DSP were determined by ion-interaction chromatography. NaCl in the formulation was quantified by measuring the osmolality and using the subtraction method. A titration method was also used. All the employed methods were linear, accurate, precise, and specific. The correlation coefficient was >0.999 for all components in all the methods. The recovery results ranged from 99.1 to 99.7% for EDTA, 99.1-99.4% for BKC, 99.8-100.8% for DSP, and 99.7-100.1% for NaCl. The obtained % relative standard deviation for precision was 0.9% for EDTA, 0.6% for BKC, 0.9% for DSP, and 1.34% for NaCl. The specificity of the methods in the presence of other components, diluent, and the mobile phase was confirmed, and the analytes were specific.

Valbenazine isomers and enantiomer determination by chiral normal phase liquid chromatography.

A novel, simple, specific, rapid, enantioselective normal phase chiral high-performance liquid chromatographic method with amylose-based Chiral Pak IG-3(250 × 4.6 mM) 3.0 µM column was developed and validated for separation and quantification of isomers and enantiomer of Valbenazine. The mobile phase composed of n-Heptane, isopropyl alcohol, dichloromethane, ethanol, and diethylamine in the ratio of 70:10:15:5:0.1 (V/V/V/VV) with a gradient flow rate was applied. The injection volume was 10 µl, and detection was carried out using a photodiode array detector at 282 nM. The column compartment was set at 35°C. The resolution between the enantiomer and isomers was found to be more than 2.0. The method was linear over the concentration range of limit of quantitation to 250% for isomers and enantiomers. The method was found to be robust with column temperature. The proposed chiral method is applicable for the determination of isomers and enantiomer of Valibenazine and was successfully used in the quality control of bulk drug manufacturing and pharmaceuticals.

Design, synthesis, anticancer evaluation and molecular docking studies of 1,2,3-triazole incorporated 1,3,4-oxadiazole-Triazine derivatives.

A new library of 1,2,3-triazole-incorporated 1,3,4-oxadiazole-triazine derivatives (9a-j) was designed, synthesized, and tested in vitro for anticancer activity against PC3 and DU-145 (prostate cancer), A549 (lung cancer), and MCF-7 (breast cancer) cancer cell lines using the MTT assay with etoposide as the control drug. The compounds exhibited remarkable anticancer activity, with IC50 values ranging from 0.16 ± 0.083 µM to 11.8 ± 7.46 µM, whereas the positive control ranged from 1.97 0.45 µM to 3.08 0.135 µM. Compound 9 d with a 4-pyridyl moiety shown exceptional anticancer activity against PC3, A549, MCF-7, and DU-145 cell lines, with IC50 values of 0.17 ± 0.063 µM, 0.19 ± 0.075 µM, 0.51 ± 0.083 µM, and 0.16 ± 0.083 µM, respectively.

Estimation of purity of antimicrobial lead compound sulfonamide-anthranilate derivative methyl-ester-toluene-sulfonamide using LC to develop a new drug application.

The newly synthesized lead molecule methyl-ester-toluene-sulfonamide is the combined derivative of sulfonamide-anthranilate. It was estimated by gradient elution using 0.1% triethylamine in water with pH 2.0 as mobile phase A and the mixture of acetonitrile and tetrahydrofuran in the ratio of 975:25 (v/v) as mobile phase B at a flow rate of 0.8 ml/min and 210 nm wavelength on an Agilent 1260 infinity series HPLC system equipped with a diode array detector. The column used was ACE 3 C18-PFP (250 × 4.6 mm, 3 µm i.d.) operating at 40°C. The gradient program was time (min)/% B: 0.0/50, 3.0/50, 15.0/70, 25.0/90, 30.0/90, 31/50, and 38/50. The method is simple, accurate, rapid, and selective. The method was linear with a concentration range of 1.6-240 µg/ml. The accuracy data obtained were 98.5-100.5%. The method validation data and quality by design-based robustness study results indicate that the developed method is robust and fit for routine use in the quality control laboratory. Therefore, the ready availability of the method can be useful in pharmaceutical new drug development.

Development, stability-indicating assessment, and evaluation of influential method conditions using a full factorial design for the determination of Nintedanib esylate-related impurities.

The design of an appropriate analytical method for assessing the quality of pharmaceuticals requires a deep understanding of science, and risk evaluation approaches are appreciated. The current study discusses how a related substance method was developed for Nintedanib esylate. The best possible separation between the critical peak pairs was achieved using an X-Select charged surface hybrid Phenyl Hexyl (150 × 4.6) mm, 3.5 µm column. A mixture of water, acetonitrile, and methanol in mobile phase-A (70:20:10) and mobile phase-B (20:70:10), with 0.1% trifluoroacetic acid and 0.05% formic acid in both eluents. The set flow rate, wavelength, and injection volumes were 1.0 ml/min, 285 nm, and 5 µl, respectively, with gradient elution. The method conditions were validated as per regulatory requirements and United States Pharmacopeia general chapter < 1225 >. The correlation coefficient for all impurities from the linearity experiment was found to be > 0.999. The % relative standard deviation from the precision experiments ranged from 0.4 to 3.6. The mean %recovery from the accuracy study ranged from 92.5 to 106.5. Demonstrated the power of the stability-indicating method through degradation studies; the active drug component is more vulnerable to oxidation than other conditions. Final method conditions were further evaluated using a full-factorial design. The robust method conditions were identified using the graphical optimization from the design space.

Determination and quantification of related substances and degradation products in bictegravir by full factorial design evaluated HPLC and mass spectrometry.

Determining and quantifying novel impurities and degraded impurities of a drug product is always a continuous challenge to enhancing the drug quality for patients' safety. Herein, our work deals with (i) developing a rapid, accurate, and reliable high-performance liquid chromatographic validation method to quantify the bictegravir drug (integrase inhibitors of antiretroviral drugs) and its novel related impurities at low levels, and (ii) the liquid chromatography-mass spectrometry (LC-MS) method to identify degraded impurities. Separation of bictegravir acid (impurity-I) and methyl bictegravir (impurity-II) impurities which are identified by LC-MS in the bictegravir drug was executed by developing a method and the same method performance evaluated by using full factorial design. This developed analytical technique gave a well-separated peak of bictegravir and related analytes such as bictegravir acid (impurity-I) and methyl bictegravir (impurity-II), adequate with the peak properties as per USP guidelines. The method's sensitivity and linearity are demonstrated by its detection and quantification limits at low levels with a correlation coefficient of 0.998. The method's repeatability, specificity, and accuracy suggest that this developed technique is a reliable determination strategy for the bictegravir drug substance and its related impurities (impurity-I and impurity-II) in a simple, feasible, and affordable way.

Convenient synthesis, characterization and biological evaluation of novel 1-phenylcyclopropane carboxamide derivatives.

Small, strained ring molecules of phenylcyclopropane carboxamide have rigid, defined conformations and unique electronic properties. For these reasons many groups, seek to use these subunits to form biologically active compounds. Herein we report a generally applicable approach for preparing a small cyclopropane ring containing 1-phenylcyclopropane carboxamide derivatives to a wide range of the different aromatic compounds by α-alkylation of 2-phenyl acetonitrile derivatives with 1, 2-dibromo ethane in good yields followed by the conversion of cyano group to acid group by the reaction with concentrated hydrochloric acid. This obtained acid derivative undergoes acid amine coupling with various Methyl 2-(aminophenoxy)acetate to form 1-Phenylcyclopropane Carboxamide. These compounds possess distinct effective inhibition on the proliferation of U937, pro-monocytic, human myeloid leukaemia cell line while these compounds did not show cytotoxic activity on these cells. The structure-activity relationships of these compounds are discussed.